The Electrochemical Shielding Box helps in sensitive measurements by protecting a sample from external EM fields and ambient light. It also helps keeping optics clean.

In photoelectrochemical measurement where electric currents smaller that 10 nA are to be recorder, the Electrochemical Shielding Box forms a Faraday cage and reduces EM noise below pA levels.

Similarly when small light intensity are measured, as with reflected light and an integrating sphere, influence of ambient light would swamp the actual signal.

The connector port on the side of the chamber allows the Potentiostat to be mounted directly to the chamber without any cables.

The Electrochemical Shielding Box is equipped with the BNC sockets that allows to measure electrochemical samples with the Potentiostat assembled outside the chamber.

• Internal dimensions: 30 cm x 30 cm x 18 cm;
• Number of side ports: 4
• Diameter of side ports: 25 mm (1″)
• Floor: aluminum breadboard for easy optics attaching.
• Standard connector: for potentiostat, filter wheel and photodiodes.

样品室可保护样品免受外部电磁场和环境光的影响，有助于进行敏感测量。它还有助于保持光学器件的清洁。

在需要记录小于 10 nA 电流的光电化学测量中，样品室可形成一个法拉第笼，将电磁噪声降至 pA 级以下。

同样，在测量小光强时，如使用反射光和积分球，环境光的影响会掩盖实际信号。

腔体侧面的连接器端口可将恒电位仪直接安装到腔体上，无需任何电缆。

该箱通常与光电光谱仪的单色器一起使用。它也可与微型光电光谱仪一起使用。

样品室配备有 BNC 插座，可在室外安装恒电位仪测量电化学样品。

• 内部尺寸 30 厘米 x 30 厘米 x 18 厘米
• 侧面端口数量： 4
• 侧端口直径： 25 毫米（1 英寸 25 毫米（1 英寸）
• 底板：铝制面包板，便于安装光学器件。
• 标准连接器：用于恒电位仪、滤波轮和光电二极管。